A thoughtful lighting design can transform your kitchen island from a barely functional space into the centerpiece of your kitchen. There are several criteria you need to keep in mind before choosing and installing kitchen island lighting, in this post we will answer these essential questions to help you in your lighting design journey.

A Guide to Kitchen Island Pendant Light

How many lights should be on a kitchen island?

Generally speaking it's best to follow the rule of three, three pendant lights are ideal. However, the number of light fixtures above a kitchen island also depends on the size of the island itself. If you have a fairly small island (5-6 feet), two pendant lights are sufficient. Even if your kitchen island is larger than 6 feet, you can still recommend two pendant lights - just make sure they are big enough to illuminate the entire surface area.

How big should pendant lights be?

In order to determine how big the pendant lights above the kitchen island should be, first determine the width of the island. Then subtract 12 from that number, the result is the recommended maximum diameter (or width) of the pendant light in inches. For example, if the width of the kitchen island is 27 inches, then the width of the pendant light should not exceed 15 inches.

In terms of the minimum width, the one thing to keep in mind is not to go too small on a large island. If you choose fixtures that are small, they will look awkward and out of place. Better to go bigger, especially if you want them to act as statement pieces.

How far apart should kitchen island lights be placed?

Kitchen island lights should be placed at least 6" from the edge of the island (the ones on either end) and 30" to 32" apart from each other. This applies if you're hanging three pendant lights.

How high off the counter should pendant lights hang?

It measures 30" to 32" from the countertop to the bottom of the pendant light. Most pendant lights are adjustable – just make sure there's enough given, especially if your have very high ceilings.

Sunwin is one of the professional island pendants suppliers in China, has more than 16 years experience on kitchen island hanging light fixtures. We are at your services 7x24, email your requirements to sales@sunwinhotellighting.com.

Lighting is a defining aspect that may make and break your home's decor, the often-overlooked wall sconce strikes a perfect balance between shape and structure while requiring very little maintenance. Unlike other lights, wall mounted light fixtures can be used in almost every space from the terrace to the bedroom, the foyer to the laundry. Check out at Sunwin to find more beautiful wall sconce lighting.

Eye-catching Accent Lighting

Accent lighting is among the most widespread applications for sconces. Sconces may emphasize a beautiful work of art or transform a structural element into the room's main point, and they do it with seamless grace. Twin sconces opposite the component you want to emphasize usually provide aesthetic balance to the space.

Task Lighting

When it comes to job lighting, wall sconce lights are also excellent. The goal is to have the sconces exactly where you want them. If you're building a reading nook against the wall, ensure the sconce's lighting and alignment are perfect for minimizing dullness or shadows. Because many contemporary sconces have several flexible hands that can be adjusted, employing them as task lights is even more convenient.

Improve The Atmosphere

Far too much light or too little light in room is always not good, will ruin the place. To achieve the finest possible lighting balance, use sconces. They work effectively as ambience light fittings in narrow corridors or living rooms with high ceilings. They also integrate accent illumination with lighting effects to improve the room's appearance in several ways.

Contemporary wall sconces are available in a broad range of forms and sizes, you have a lot of options. The designs are infinite, from traditional sconces to ultra-sleek and classic items. Before you buy, think about the dimensions and location.

Sunwin is a professional China wall lights factory, have rich experiences on wall sconce fixtures. Contact us for more information and a business opportunity, sales@sunwinhotellighting.com.

The best desk lamp provides both functionality and style to your space, there are several factors to consider to ensure that you find the right one for your needs. They include:

1. Size and Design

Consider the size and design of the desk lamp and how it will fit into your space. Ensure that the lamp has a stable base and doesn't take up too much space. Additionally, choose a style that completes your interior decor and the aesthetic of your workspace.

2. Material and Finish

There are a wide choices of materials on the desk lamps, metal, marble, aluminum, glass, etc. Also there are lots of finishes available. Choose the one that will match your furniture and room scheme.

3. Adjustable Brightness

Look for the lamps with adjustable brightness levels and color temperatures, so you can find the right lighting to suit your task at hand. You'll need a brighter light for reading or studying, and less light for working on a computer or watching TV.

4. Direction and Flexibility

Look for a desk lamp with an adjustable arm, swivel head or pivoting feature that allows you to direct the light precisely where you need it.

5. Energy Efficiency

Opt for a desk lamp with energy-efficient technology, such as LEDs. Desk lamps with built-in LED consume less energy and have a longer lifespan compared to traditional incandescent or fluorescent bulbs, resulting in cost savings and reduced environmental impact.

6. Durability and Quality

Check the quality of materials and construction to ensure the lamp is sturdy and durable. A well-built lamp will withstand daily use and last longer.

7. Additional Features

Consider any additional features that might be useful to you. This could include built-in USB ports or power outlets for charging devices, integrated wireless charging station, or touch sensor switches for easy operation.

By considering these factors, you are able to select a desk lamp that meets your needs, enhances your productivity, and improves the overall ambiance of your space.

Sunwin company is one professional desk light supplier in China, with over 17 years' production experience and excellent services we can provide you the best desk lamps. Contact us right now to get your appointed salesman at sales@sunwinhotellighting.com.

Wall lighting sconces are perfect for adding illumination to a room, and are incredibly used in a variety of locations - even outside. The flexibility makes them a great choice for any area.

Bedrooms

Instead of table lamps taking up space on your nightstands, install sconce lights above them for a more streamlined look.

Bathrooms

Illuminate your vanity mirror with a sconce on either side, so you have a clear view when you're preparing for the day.

Corners/nooks

If there's a small area of a room that's darker than the rest, add a sconce fixture so you can use that spot as a dedicated reading corner.

Hallways, entryways, or foyers

Sconces will give light to a dark hallway or foyer so your guests step into a well-lit area when they arrive.

Around wall art

If you have a favorite piece of wall art, highlight it with a pair of wall sconces so that it stands out.

Outdoors

Outdoor sconces can flank exterior doors, especially if you want additional light on your deck or patio.

Along with being completely functional, wall sconces give you the opportunity to enhance your wall space or the overall design of a room if you want to add a little color or personality.

Sunwin lighting is one of the best China wall lamps factories, has been in the industry over 17 years. Send your projects to us right now to get a free quote, at sales@sunwinhotellighting.com.

Ceiling lighting fixtures can be used in a wide of places in a home or commercial space, here are some common areas where they are typically installed.

1. CEILING LAMPS FOR LIVING ROOM

Ceiling flush lights are often placed in the center of the living room to provide overall illumination, they distribute lighting evenly across the room, ensuring that the entire area is well-lit. When they pair with floor lamps, it ensures you create a base layer of light that achieves the perfect atmosphere and mood lighting in your space.

2. BEDROOM CEILING FIXTURES

In the bedroom, ceiling lights can provide general lighting for the entire room, can contribute to the overall design and style of the room to create a cohesive look with the rest of your décor, and can help you perform daily activities. Bedroom flush lights include flush mount fixtures, semi-flush mount lights, or even ceiling fans with built-in lighting.

3. DINING CEILING LIGHTS

Ceiling lamps are usually installed over the dining table to serve as a focal point and provide both general and focused lighting for dining activities. The fixtures create an inviting and appealing atmosphere for meals and gatherings.

4. KITCHEN CEILING LAMPS, KITCHEN ISLAND CEILING LIGHTS

If your kitchen ceilings are not higher than ten feet, flush mount ceiling fixtures are the best choice for adding general ambient lighting to the entire space. They ensure the kitchens and island areas are bright enough to enable tasks to be carried out efficiently. Sometimes two or three lights are placed as a group to eliminate shadows and provide even lighting.

5. BATHROOM CEILING LIGHT FIXTURES

Proper lighting is crucial in the bathroom for tasks such as grooming and applying makeup, use a ceiling light to provide baseline illumination that will increase the effectiveness. Flush bathroom ceiling lights won't take up too much space, and are often damp or wet rated.

6. HALLWAY CEILING LIGHT FIXTURES, ENTRYWAY CEILING LIGHTS

In the hallways or entryways, flush ceiling lamps are often mounted to offer enough lighting for people to pass through these areas.

Generally ceiling lights play an important role for ceilings under ten feet that can be used for lots of areas, choose the right one after you check your ceiling height.

Sunwin is one of the well-known modern ceiling light fixtures suppliers in China, please feel free to send your RFQs to sales@sunwinhotellighting.com to get our professional services, whether for your wholesale business or for your projects.

Pendant lamps have a wide versatility and can enhance your spaces with both functional and beautiful lighting. With the right one, you can make a statement for each space. Here are some common areas where pendant lights are effectively used.

* Kitchen Island: Pendant hanging light fixtures are ideal for illuminating islands and bars, they provide focused lighting while also adding a stylish design element. Pendants over island create a visual anchor in an open-concept space, help define the area.

* Dining Room: Dining pendant lights can work as a statement piece above the dining table, creating a well-lit and inviting atmosphere. Whether it's a minimalist glass globe or an ornate chandelier style pendant, they add personality to the room.

* Living Room: In the living room, pendant hanging lamps can introduce drama or sophistication to the space. Whether using a single large fixture or a cluster hanging pendant, it can act as a focal point adding visual interest and enhancing the room's ambiance.

* Bedroom: Using pendant lights as bedside lighting is a space-saving alternative to traditional table lamps, this is especially helpful in small bedrooms. Many pendants have adjustable cords or rods, allowing them to hang at the ideal height for reading in bed or adding visual balance in the room.

* Bathroom: Hanging lighting fixtures can be placed strategically around mirrors and sinks, giving targeted lighting for tasks like shaving, makeup application, and skincare routines. They bring stunning design to the space and complete the overall interiors.

* Entryway & Hallway: Hanging lamps in entryways or hallways illuminate and create a welcoming atmosphere when entering a house. Large pendants or cluster lights can make a great first impression.

* Staircase: Pendant lights can add visual interest and highlight the architectural feature of the stairs. Multi-light or tiered pendants can be installed along stairwells for a cascading light effect.

* Office: Pendant lights with focused downlighting offer task lighting over desks or workspaces, can help improve productivity and add design flair to the office.

In hotel projects, pendant lights are often used in lobbies, guest rooms, and conference rooms to add sophistication and enhance the overall ambiance.

Sunwin is a professional supplier on hanging pendant ceiling lights in China. Send your request to sales@sunwinhotellighting.com to experience high-quality lights and LED mirrors with outstanding service.

The bathroom is a room that we spend a lot of time in for the morning and for the evening, so it's important to make it a space that we enjoy being in. A lighted LED vanity mirror is a great way to do that. It can provide a warm and welcoming glow, and it can also be a functional addition to the space.

When there are no shadows, you can see your face clearly, which helps you choose the right makeup colors and hair style.

LED lighting is a win for everybody. They are cheaper, last longer, and use less energy than its traditional counterparts.

A bathroom LED mirror often has an anti-fog function, which prevents it from fogging up when you take a shower.

LED mirrors can be dimmable and changed to different colors, they're helpful for different tasks such as applying makeup or shaving.

The electric LED vanity mirror is typically water-resistant construction, which makes them ideal for bathrooms.

In addition to having great functions, vanity mirrors with LED lights come in various shapes and styles, making them a flexible choice for vanity mirror design. We've created a comprehensive guide to help you find the LED mirror that best fits your decor and needs.

If you would like any further information, please feel free to contact our advisor via sales@sunwinhotellighting.com - we're always happy to help! Sunwin is one of the famous China LED bathroom mirror factories, has over 17 years' rich experience on custom lighted mirrors.

What Are the Benefits of Using IsoClad 933 PCB?

In the ever-evolving world of electronics, the demand for high-performance, reliable, and versatile printed circuit boards (PCBs) is at an all-time high. Enter the IsoClad 933 PCB, a cutting-edge solution designed to meet the rigorous demands of modern applications. Whether you're working on conformal antennas, radar systems, or electronic warfare systems, the IsoClad 933 31mil PCB is engineered to deliver exceptional performance, durability, and precision.

In this deep dive, we’ll explore the features, benefits, construction details, and applications of the IsoClad 933 PCB, showcasing why it’s a good PCB in the PCB industry.

Introduction to IsoClad 933: The Foundation of Innovation

Rogers Corporation, a global leader in advanced materials, has once again raised the bar with its IsoClad 933 laminates. These laminates are non-woven fiberglass/PTFE (polytetrafluoroethylene) composites specifically designed for use as PCB substrates. What sets IsoClad 933 apart is its unique non-woven reinforcement, which provides unparalleled flexibility and conformability. This makes it an ideal choice for applications where the final circuit may need to adapt to complex shapes or environments.

The proprietary manufacturing process of Rogers IsoClad 933 incorporates longer random fibers, resulting in superior dimensional stability and enhanced mechanical strength. These properties make it a reliable substrate for high-frequency and high-performance applications, ensuring consistent performance even under challenging conditions.

Key Features of IsoClad 933 PCB

The IsoClad 933 Rogers PCB is packed with features that make it stand out in the competitive PCB market. Here’s a closer look at what makes this product exceptional:

1. Exceptional Electrical Properties

-Dielectric Constant (Dk): 2.33 at 10GHz/23°C

The low and stable dielectric constant ensures minimal signal loss, making it ideal for high-frequency applications.

-Dissipation Factor (Df): 0.0016 at 10GHz/23°C

The low dissipation factor translates to reduced signal attenuation, ensuring efficient signal transmission.

2. Mechanical Strength and Durability

-Peel Strength: 10 lbs. per inch

This high peel strength ensures robust bonding between layers, enhancing the PCB’s durability.

-Low Water Absorption: 0.05%

The low water absorption rate makes it suitable for use in humid or moisture-prone environments.

3. Dimensional Stability

The non-woven fiberglass reinforcement provides excellent dimensional stability, reducing the risk of warping or deformation during manufacturing or operation.

4. Low Outgassing

Total Mass Loss (TML): 0.03%

Collected Volatile Condensable Materials (CVCM): 0%

Water Vapor Regained (WVR): 0.02%

These low outgassing properties make IsoClad 933 suitable for aerospace and satellite applications, where outgassing can compromise performance.

5. Great Dk Uniformity

The consistent dielectric constant across the board ensures reliable performance across a wide range of frequencies.

Benefits of IsoClad 933 PCB

The IsoClad 933 31mil Rogers substrate PCB isn’t just about features; it’s about delivering tangible benefits to engineers, designers, and end-users. Here’s what you can expect:

1. Flexibility and Conformability

Unlike traditional woven fiberglass PCBs, IsoClad 933 is less rigid, making it ideal for applications requiring conformability. This flexibility opens up new possibilities for innovative designs, particularly in conformal antennas and wearable electronics.

2. High Isotropy

The material is highly isotropic in the X, Y, and Z axes, ensuring uniform performance regardless of the direction of signal propagation.

3. Stable Dk Over a Range of Frequencies

The stable dielectric constant across frequencies ensures consistent performance, making it suitable for broadband applications.

4. Improved Dimensional Stability

The enhanced dimensional stability reduces the risk of manufacturing defects, ensuring higher yields and lower costs.

5. Versatility

From aerospace to telecommunications, the IsoClad 933 PCB is versatile enough to meet the demands of a wide range of industries.

PCB Construction Details

The IsoClad 933 PCB is meticulously crafted to meet the highest standards of quality and performance. Here’s a breakdown of its construction:

PCB Stackup

Layer 1: Copper (35μm)

Core: Rogers IsoClad 933 (0.787 mm / 31 mil)

Layer 2: Copper (35μm)

PCB Construction

Board Dimensions: The IsoClad 933 PCB comes in a standard size of 70.07mm x 58.31mm, allowing for versatile use across various applications. The dimensions are precise, with a tolerance of +/- 0.15mm.

Minimum Trace/Space: The PCB supports a minimum trace/space of 5/4 mils, enabling precise routing of high-density circuitry and enhancing overall design flexibility.

Minimum Hole Size: The IsoClad 933 PCB accommodates a minimum hole size of 0.3mm, ensuring compatibility with a wide range of components and facilitating efficient assembly processes.

Finished Board Thickness: The finished thickness of the IsoClad 933 PCB is 0.9mm, striking the perfect balance between robustness and compactness.

Finished Cu Weight: The outer layers of the PCB feature a finished copper weight of 1oz (1.4 mils), providing an ideal balance between conductivity and manufacturability.

Via Plating Thickness: The via plating thickness of the IsoClad 933 PCB is 20μm, ensuring reliable electrical connectivity throughout the circuit.

Surface Finish: The PCB is treated with immersion tin, offering excellent solderability and preserving the copper pads from oxidation.

Silkscreen and Solder Mask: The IsoClad 933 PCB comes with a top silkscreen in white, providing clear component labeling. It features a blue top solder mask, protecting the copper traces and ensuring easy inspection.

100% Electrical Test: Prior to shipment, each IsoClad 933 PCB undergoes a rigorous 100% electrical test, ensuring that it meets the specified performance parameters and adheres to the highest standards of quality.

PCB Statistics

The IsoClad 933 PCB demonstrates its versatility and adaptability through its wide range of statistics:

Components: The PCB can accommodate up to 19 components, offering ample space for various functionalities and circuitry requirements.

Total Pads: With a total of 52 pads, the IsoClad 933 PCB enables efficient connectivity and integration of components.

Thru-Hole Pads: The PCB provides 25 via pads for through-hole components, facilitating robust and reliable connections.

Top SMT Pads: With 27 surface-mount technology (SMT) pads on the top layer, the IsoClad 933 PCB complements modern assembly techniques and enables compact designs.

Bottom SMT Pads: The PCB has no SMT pads on the bottom layer, making it suitable for applications where components are primarily mounted on the top layer.

Vias: The IsoClad 933 PCB features 17 vias, enabling seamless through-hole connections between different layers of the circuit.

Nets: The PCB supports 2 nets, ensuring efficient signal routing and effective connectivity.

Typical Applications

The IsoClad 933 high frequency PCB is designed to excel in a variety of high-performance applications. Here are some of the most common use cases:

1. Conformal Antennas

The flexibility and conformability of IsoClad 933 make it an excellent choice for conformal antennas, which are often used in aerospace and defense applications.

2. Stripline and Microstrip Circuits

The stable dielectric constant and low dissipation factor make it ideal for stripline and microstrip circuits, ensuring minimal signal loss and high efficiency.

3. Guidance Systems

The high mechanical strength and dimensional stability of IsoClad 933 make it suitable for guidance systems, where precision and reliability are critical.

4. Radar and Electronic Warfare Systems

The low outgassing and excellent electrical properties make it a preferred choice for radar and electronic warfare systems, where performance under extreme conditions is a must.

Why Choose IsoClad 933 PCB?

In a market flooded with options, the IsoClad 933 PCB stands out for its unique combination of flexibility, durability, and performance. Whether you’re designing cutting-edge electronics for aerospace, defense, or telecommunications, this PCB offers the reliability and versatility you need to bring your vision to life.

With its advanced features, robust construction, and proven performance, the IsoClad 933 PCB is more than just a component—it’s a foundation for innovation.

Conclusion

The IsoClad 933 high frequency circuit board is a testament to Rogers Corporation’s commitment to pushing the boundaries of what’s possible in PCB technology. Its unique blend of flexibility, stability, and performance makes it an indispensable tool for engineers and designers working on the next generation of electronic devices.

Whether you’re developing conformal antennas, radar systems, or guidance systems, the IsoClad 933 PCB is ready to meet your most demanding requirements. Explore the possibilities today and experience the difference that advanced materials and superior engineering can make.

Availability: Worldwide

Artwork Format: Gerber RS-274-X

Quality Standard: IPC-Class-2

For more information or to place an order, contact us today and let us help you take your projects to the next level with the IsoClad 933 PCB!

What Are the Advantages of Using A Hybrid PCB with RO4003C and S1000-2M Materials?

Introduction:

In the fast-paced world of electronics, the demand for high-frequency and low-loss circuit boards continues to drive innovation. To meet these requirements, we present our newly shipped Hybrid PCB, incorporating the advanced materials RO4003C and S1000-2M. Designed for superior performance and cost-effective fabrication, this 6-layer PCB offers exceptional characteristics for RF microwave circuits, matching networks, and controlled impedance transmission lines. In this blog, we delve into the features, construction details, and potential applications of this cutting-edge hybrid PCB.

1. Introduction to RO4003C:

Rogers RO4003C materials are a breakthrough in PCB technology, combining the excellent electrical properties of PTFE/woven glass with the manufacturing feasibility of epoxy/glass. The result is a low-loss material that can be fabricated using standard epoxy/glass (FR-4) processes at competitive prices. With its unique composition, Rogers RO4003c PCB offers superior high-frequency performance and opens up new possibilities for RF microwave circuit design.

RO4003C Substrate are specifically tailored to meet the needs of high-frequency designers, providing low dielectric loss and enabling applications that were previously limited due to operating frequency constraints. Furthermore,RO4003C laminates utilize various configurations, all of which meet the same electrical performance specifications. It is important to note that these materials are non-brominated and not UL 94 V-0 rated, making them an environmentally friendly choice.

2. Features of RO4003C:

2.1 Dielectric Properties:

RO4003C exhibits impressive dielectric properties that contribute to its exceptional performance:

- Dielectric Constant (DK):

Primarily measured at 3.38 +/- 0.05 at 10GHz, this property ensures stable signal propagation throughout high-frequency applications.

- Dissipation Factor:

With a value of 0.0027 at 10GHz, RO4003C minimizes signal loss, enabling efficient signal transmission.

- Thermal Conductivity:

The material's thermal conductivity is 0.71 W/m/°K, facilitating effective heat dissipation within the PCB.

- Thermal Coefficient of Dielectric Constant:

RO4003C exhibits a negligible variation in dielectric constant over a wide temperature range, demonstrating stability and reliability.

- CTE Matched to Copper:

The material showcases a CTE matched to copper, with X-axis at 11 ppm/°C and Y-axis at 14 ppm/°C.

- Low Z-Axis Coefficient of Thermal Expansion:

RO4003C maintains a low coefficient of thermal expansion, measured at 46 ppm/°C.

- High Glass Transition Temperature (Tg):

The Tg of RO4003C exceeds 280°C, ensuring excellent thermal stability even under demanding conditions.

- Low Moisture Absorption:

RO4003C has a low moisture absorption rate of 0.06%, preventing performance degradation caused by humidity.

2.2 Features of S1000-2M:

The S1000-2M substrate, combined with RO4003C, enhances the Hybrid PCB's performance further:

- Lower Z-Axis CTE:

The S1000-2M exhibits a lower coefficient of thermal expansion, significantly improving trough-hole reliability.

- Excellent Mechanical Processability and Thermal Resistance:

S1000-2M offers superior mechanical processability, making it ideal for various manufacturing processes. It also exhibits exceptional thermal resistance, ensuring reliable functionality under demanding operating conditions.

- Lead-free Compatibility:

With lead-free compatibility, the PCB meets environmental standards and supports future sustainability goals.

- High Heat Resistance:

S1000-2M possesses high heat resistance, enabling reliable operation under elevated temperature scenarios.

- Excellent Anti-CAF (Conductive Anodic Filament) Performance:

The material's anti-CAF properties prevent conductive filament formation, enhancing long-term reliability.

- Low Water Absorption:

S1000-2M exhibits low water absorption, protecting the PCB's electrical characteristics from moisture-related issues.

What are the advantages of using a Hybrid PCB with RO4003C and S1000-2M materials?

High Frequency Performance:

RO4003C is a high-frequency laminate material known for its excellent electrical properties. It offers low insertion loss, low dielectric constant, and tight control over impedance, making it ideal for applications that require high-frequency performance. S1000-2M, on the other hand, is a versatile material with good electrical properties, suitable for RF and microwave applications.

Design Flexibility:

Hybrid PCB Material allow for the combination of different materials to optimize the board's performance. By using RO4003C and ShengyiS1000-2M materials together, designers can take advantage of the unique properties of each material to achieve specific design goals. This combination provides flexibility in designing circuits with different impedance requirements and can help achieve higher performance.

Cost Optimization:

Hybrid circuit materials PCBs offer the opportunity to optimize costs while maintaining performance requirements. By strategically using RO4003C and S1000-2M materials, designers can allocate the high-performance material where it's most needed while using the cost-effective material in less critical areas. This approach helps balance the overall cost of the PCB without compromising performance.

Thermal Management:

RO4003C and S1000-2M materials have different thermal properties. By using a hybrid PCB with these materials, designers can benefit from improved thermal management. They can strategically place components on the board to leverage the different thermal conductivity and heat dissipation capabilities of the materials, ensuring optimal thermal performance.

Reliability and Durability:

Both RO4003C and S1000-2M materials are known for their reliability and durability. Hybrid PCBs using these materials can withstand harsh operating conditions, such as high temperatures and high-frequency signals, while maintaining their electrical performance and mechanical integrity over time. This ensures a longer lifespan and higher reliability of the overall electronic system.

Miniaturization:

The combination of RO4003C and S1000-2M materials enables the design of compact and miniaturized electronic systems. RO4003C offers excellent electrical properties in a thin form factor, allowing for high-density circuit designs. S1000-2M, with its versatile characteristics, complements the design by providing a cost-effective material for less critical areas, enabling further miniaturization of the overall PCB assembly.

These advantages make hybrid PCBs with RO4003C and S1000-2M materials an attractive choice for applications such as telecommunications, aerospace, automotive, and high-speed digital circuits that require high-frequency performance, reliability, cost-optimization, and thermal management.

3. PCB Stackup:

The Hybrid PCB features a 6-layer pcb stackup that optimizes signal integrity and reliability:

- Copper Layer 1: 35μm

- RO4003C: 0.305 mm (12 mil)

- Copper Layer 2: 35μm

- Prepreg: 1080 RC63% 0.0644 mm (2.5 mil)

- Copper Layer 3: 35μm

- S1000-2M: 0.203 mm (3 mil)

- Copper Layer 4: 35μm

- Prepreg: 1080 RC63% 0.0644 mm (2.5 mil)

- Copper Layer 5: 35μm

- RO4003C: 0.305 mm (12 mil)

- Copper Layer 6: 35μm

4. Artwork and Standard Compliance:

The Hybrid PCB complies with industry-standard specifications and is designed for ease of use:

- Artwork Format:

Gerber RS-274-X artwork ensures compatibility and allows for seamless integration into existing design workflows.

- Accepted Standard:

The Hybrid PCB adheres to the IPC-Class-2 standard, guaranteeing reliability and interoperability.

- Worldwide Availability:

This groundbreaking Hybrid PCB is available for purchase worldwide, ensuring accessibility for customers across the globe.

5. Typical Applications:

The Hybrid PCB excels in a wide range of applications, including but not limited to:

- Commercial Airline Broadband Antennas:

The PCB offers exceptional performance in the demanding environments of commercial aircraft.

- Microstrip and Stripline Circuits:

With its low dielectric loss and controlled impedance characteristics, the PCB enables precise transmission line design.

- Millimeter Wave Applications:

The Hybrid PCB facilitates the development of millimeter wave systems, achieving high-frequency performance and reliability.

- Radar Systems:

The PCB's properties make it an ideal choice for radar systems that require accurate signal transmission and low loss.

- Guidance Systems:

The high-performance capabilities of the Hybrid PCB contribute to reliable guidance systems in various industries.

- Point-to-Point Digital Radio Antennas:

The PCB provides the necessary characteristics for efficient point-to-point digital radio communication.

Conclusion

The Hybrid PCB Board featuring the RO4003C and S1000-2M materials offers outstanding performance and reliability for high-frequency applications. With the capabilities of the RO4003C material combined with the benefits of the S1000-2M material, this 6 layer board PCB provides unparalleled flexibility, signal integrity, and thermal management. From commercial airline antennas to guidance systems, thishybrid circuit board caters to a wide array of applications. Experience the power of hybrid technology by integrating our advanced Hybrid PCB into your designs and unlock the next level of electronic performance.

What Is IT-180 Material, and Why Is It Used in PCBs?

In today’s fast-paced technological landscape, the demand for high-performance, reliable, and durable printed circuit boards (PCBs) is greater than ever. Whether you’re designing cutting-edge automotive systems, robust networking equipment, or high-speed telecommunications devices, the foundation of your success lies in the quality of your PCB. That’s why we’re excited to introduce our newly shipped 12-Layer Through-Hole IT-180 Material PCB, a state-of-the-art solution engineered to meet the most demanding requirements of modern electronics.  

This 12 layers PCB is designed with precision, utilizing advanced materials and manufacturing techniques to deliver exceptional performance, thermal reliability, and impedance control. Let’s dive deep into the features, specifications, and applications of this remarkable product.  

1. Material Excellence: IT-180A FR-4 Tg170°C

The backbone of this PCB is the IT-180A material, a high-performance epoxy resin with a glass transition temperature (Tg) of 170°C. This material is specifically designed to handle high thermal stress, making it suitable for lead-free assembly processes and applications exposed to elevated temperatures.

Key features of IT-180A include:

-High Thermal Reliability: Withstands T260 >60 minutes and T288 >20 minutes, ensuring durability during reflow soldering.

-Low Moisture Absorption: At just 0.1%, it minimizes the risk of delamination or electrical failure in humid environments.

-CAF Resistance: Excellent resistance to conductive anodic filament (CAF) formation, enhancing long-term reliability.

-UL 94-V0 Flammability Rating: Meets stringent safety standards for fire resistance.

2. Impedance Control for Signal Integrity

Signal integrity is paramount in high-speed applications, and this PCB delivers with precise impedance control. The board supports multiple impedance values:

-50ΩDifferential Pairs: Optimized for high-speed data transmission.

-90Ωand 100ΩDifferential Pairs: Ideal for differential signaling in communication protocols like USB, HDMI, and Ethernet.

The impedance-controlled traces are meticulously designed with specific trace widths, gaps, and reference layers to ensure minimal signal loss and crosstalk.

3. Robust Construction and Stack-Up

The 12-layer stack-up is a masterpiece of engineering, balancing signal integrity, thermal management, and mechanical strength. Here’s a breakdown of the stack-up:

This symmetrical stack-up ensures even distribution of thermal and mechanical stress, reducing the risk of warping or delamination.

4. Advanced Via Technology

The multilayer printed circuit board features plated through-holes (PTH) spanning all 12 layers, ensuring reliable electrical connections. Additionally, all 0.2mm and 0.3mm vias are filled and capped according to IPC 4761 Type VII, enhancing mechanical strength and solderability.

5. Solder Mask and Silkscreen

The multilayer circuit boards are coated with a matt red solder mask on both sides, providing excellent protection against oxidation and solder bridging. A white silkscreen on the top side ensures clear component labeling and assembly guidance.

Key Features and Benefits

1. High Thermal Performance

With ahighTg 170°Cand excellent thermal resistance, this PCB is built to handle high-temperature environments, making it ideal for automotive and industrial applications.

2. Superior Signal Integrity

The impedance-controlled design minimizes signal loss and crosstalk, ensuring reliable performance in high-speed data transmission.

3. Durability and Reliability

The use of IT-180A material, combined with advanced via filling and capping, ensures long-term reliability even in harsh conditions.

4. Compliance with Industry Standards

The PCB meets IPC-Class-2 standards, ensuring high-quality manufacturing and performance.

Applications of the 12-Layer Through-Hole PCB

This PCB is versatile and suitable for a wide range of high-performance applications, including:

1. Automotive Electronics

Engine room ECUs

Advanced driver-assistance systems (ADAS)

Infotainment systems

2. Telecommunications

5G infrastructure

Base stations

Network routers and switches

3. Data Storage and Servers

High-speed data storage systems

Server motherboards

Network attached storage (NAS) devices

4. Industrial Equipment

Automation systems

Power supplies

Control panels

Why Choose This PCB?

The 12-Layer Through-Hole PCB is more than just a circuit board—it’s a solution engineered for excellence. Here’s why it stands out:

Advanced Material: IT-180A ensures high thermal and mechanical performance.

Precision Engineering: Impedance control and symmetrical stack-up guarantee signal integrity.

Global Availability:Ready to ship worldwide, meeting your production timelines.

Compliance and Quality:Adherence to IPC-Class-2 standards ensures reliability.

Conclusion

In a world where technology is constantly evolving, the 12-Layer Through-Hole PCB sets a new standard for performance, reliability, and versatility. Whether you’re designing cutting-edge automotive systems, high-speed telecommunications infrastructure, or robust industrial equipment, this PCB is your trusted partner.

With its advanced materials, precise impedance control, and robust construction, it’s not just a PCB—it’s the foundation of innovation.

Ready to elevate your designs? Contact us today to learn more about the 12-Layer Through-Hole PCB and how it can power your next project.